F1Welcome to Ubuntu!This is a live CD-ROM for Ubuntu
8.10. It was built on 20081029.1.
HELP INDEX
KEY TOPIC
<F1F1> This page, the help index.
<F2F2> Prerequisites for running Ubuntu.
<F3F3> Boot methods for special ways of using this CD-ROM.
<F4F4> Additional boot methods; rescuing a broken system.
<F5F5> Special boot parameters, overview.
<F6F6> Special boot parameters for special machines.
<F7F7> Special boot parameters for selected disk controllers.
<F8F8> Special boot parameters for the bootstrap system.
<F9F9> How to get help.
<F10F10> Copyrights and warranties.
Press F2 through F10 for details, or Escape to exit help.F2PREREQUISITES FOR INSTALLING UBUNTUYou must have at least 384 megabytes of RAM to use this Ubuntu live system.
The live system does not require any space on your hard disk. However,
existing Linux swap partitions on the disk will be used if available.
See the FAQ for more information; this document is available at the Ubuntu
web site, http://www.ubuntu.com/
Thank you for choosing Ubuntu!
Press F1 for the help index, or Escape to exit help.F3BOOT METHODSAvailable boot methods:
Try Ubuntu without any change to your computer
Start the live system. If you wish, you can install it later using the
"Install" icon on the desktop.
Install Ubuntu
Start the installation.
Test memory
Perform a memory test.
("Ubuntu" may be replaced with other related operating system names. This
help text is generic.)
To use one of these boot methods, select it from the menu with the cursor
keys. Press F4 to select alternative start-up and installation modes. Press
F6 to edit boot parameters. Press F6 again to select from a menu of
commonly-used boot parameters.
Except in expert mode, non-critical kernel boot messages are suppressed.
Press F1 for the help index, or Escape to exit help.F4RESCUING A BROKEN SYSTEMThere is no dedicated rescue mode on this CD. However, since the entire
system runs from the CD, it is possible to use the command-line and/or
graphical tools provided to rescue a broken system, and to use a web browser
to search for help. Extensive advice is available online for most kinds of
problems that might cause your normal system to fail to boot correctly.
Press F1 for the help index, or Escape to exit help.F5SPECIAL BOOT PARAMETERS - OVERVIEWOn a few systems, you may need to specify a parameter by pressing F6 in
order to boot the system. For example, Linux may not be able to autodetect
your hardware, and you may need to explicitly specify its location or type
for it to be recognized.
For more information about what boot parameters you can use, press:
<F6F6> boot parameters for special machines
<F7F7> boot parameters for various disk controllers
<F8F8> boot parameters understood by the bootstrap system
Many kernel modules are loaded dynamically by the bootstrap system, and
parameters for those modules cannot be given on the command line.
Press F1 for the help index, or Escape to exit help.F6SPECIAL BOOT PARAMETERS - VARIOUS HARDWAREYou can use the following boot parameters by pressing F6, in combination
with the boot method (see <F3F3>). If you use hex numbers you have to use
the 0x prefix (e.g., 0x300).
HARDWARE PARAMETER TO SPECIFY
IBM PS/1 or ValuePoint (IDE disk) hd=cylinders,heads,sectors
Some IBM ThinkPads floppy.floppy=thinkpad
Protect I/O port regions reserve=iobase,extent[,...]
Laptops with screen display problems vga=771
Force use of generic IDE driver generic.all_generic_ide=1
Possible (temporary) workarounds for lockups or other hardware failures:
Press F1 for the help index, or Escape to exit help.F7SPECIAL BOOT PARAMETERS - VARIOUS DISK DRIVESYou can use the following boot parameters by pressing F6, in combination
Adaptec 274x, 284x aic7xxx.aic7xxx=no_reset (enabled if non-zero)
BusLogic SCSI Hosts BusLogic.BusLogic=iobase
Certain DELL machines aic7xxx.aic7xxx=no_probe
This list is incomplete, see the kernel's kernel-parameters.txt file for
more.
Press F1 for the help index, or Escape to exit help.F8SPECIAL BOOT PARAMETERS - INSTALLATION SYSTEMYou can use the following boot parameters by pressing F6, in combination
with the boot method (see <F3F3>). These parameters control how the
bootstrap system works.
RESULT PARAMETER
Use Braille tty brltty=driver,device,texttable
Disable ACPI for PCI maps (handy for some HP servers and Via-based machines)
pci=noacpi
Press F1 for the help index, or Escape to exit help.F9GETTING HELPIf you can't start Ubuntu, don't despair! The Ubuntu team is ready to help
you! We are especially interested in hearing about startup problems, because
in general they don't happen to only one person. We've either already
heard about your particular problem and can dispense a quick fix, or we
would like to hear about it and work through it with you, and the next user
who comes up with the same problem will profit from your experience!
See the FAQ for more information; this document is available at the Ubuntu
web site, http://www.ubuntu.com/
Press F1 for the help index, or Escape to exit help.F10COPYRIGHTS AND WARRANTIESUbuntu is Copyright (C) 2004-2008 Canonical Ltd., and incorporates the work
of many other original authors and contributors.
The Ubuntu system is freely redistributable. After startup, the exact
distribution terms for each package are described in the corresponding file
/usr/share/doc/packagename/copyright.
Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
applicable law.
This system is based on Debian. See http://www.debian.org/ for more
details and information on the Debian project.
Press F1 for the help index, or Escape to exit help.
